Return to list

Think You Know Aluminum Alloy Plate Standards? Think Again

2026-11-19

Think
Image Source: statics.mylandingpages.co

Industry standards are agreed-upon rules that specify what an aluminum alloy contains, how producers process it, and which properties it must meet. These rules let buyers, engineers, and suppliers worldwide speak one language and trust the same numbers. The word "standards" covers two things: designation systems such as AA 6061 and formal specifications such as ASTM B209. Both matter. A buyer can order the same aluminum alloy plate under different documents, so knowing which one governs the order separates a correct delivery from a costly surprise. Producers of aluminum alloys and users of aluminum alloys alike depend on this clarity.

Key Takeaways

  • Four organizations set aluminum alloy plate standards: AA names alloys, ASTM, EN, and ISO provide enforceable rules.
  • Always cite the governing standard on your purchase order to avoid costly mistakes.
  • Composition and temper are defined in separate documents, so check both for a complete order.
  • Mill certificates must match the purchase order exactly, including alloy, temper, and properties.
  • Equivalent standards do not guarantee identical properties; compare the details before you accept.

The Big Four Standards Bodies Behind Alloy Designations

The
Image Source: pexels

Four organizations shape most of the paperwork behind a plate order. Each one publishes its own rules, and each one uses its own vocabulary. A buyer who understands the role of each body can read a mill certificate with confidence and spot a mismatch before the metal ships.

Aluminum Association (AA) Designations

The Aluminum Association (AA) maintains the international alloy designation system that most of the world uses to name wrought and cast material. This system grew out of earlier aluminum alloy numbering systems in the United States and became the common reference point for aluminum alloy designation systems worldwide. The AA registers compositions, publishes temper definitions, and issues the designations that appear on drawings, purchase orders, and certificates.

The heart of the system is the four-digit designation system for wrought products. The first digit identifies the principal alloying elements and sorts the metal into wrought aluminum alloy families: 1xxx for commercially pure aluminum, 2xxx for copper, 3xxx for manganese, 4xxx for silicon, 5xxx for magnesium, 6xxx for magnesium plus silicon, and 7xxx for zinc. The remaining digits distinguish individual compositions within a family. A separate scheme covers cast aluminum alloy families, where a three-digit number plus a decimal point marks the casting composition. Together these rules form the four-digit wrought alloy numbering system and the companion cast numbering scheme.

The AA also publishes the designations for tempers, the mechanical treatments that follow casting and rolling. A temper code such as T651 tells a buyer that the plate was solution heat treated, stress relieved by stretching, and artificially aged. The AA does not enforce its rules. It registers them, and industry adopts them by reference. That voluntary character explains why AA nomenclature appears in contracts everywhere while the legal force usually comes from a separate specification.

ASTM International Specifications

ASTM International writes the formal specifications that govern how producers make and test aluminum alloy plate. ASTM B209, the standard specification for aluminum and aluminum-alloy sheet and plate, is the document most buyers in North America cite. It sets chemical limits, temper requirements, tensile properties, and sampling plans in one place.

An ASTM specification works as a contract. It states minimum values, defines the test methods, and describes the retest rules when a sample fails. A mill that ships plate to B209 must certify that the product meets every clause. The specification also ties the product to AA nomenclature, so a plate ordered as 6061-T651 under B209 carries both an AA designation and an ASTM compliance statement.

ASTM covers more than plate. Separate documents address extruded shapes, forgings, and castings. Buyers who work across product forms often find that one ASTM specification references another, and the chain of references matters when a dispute arises. Reading the full specification, not just the title, prevents most surprises.

European Norms (EN)

The European Committee for Standardization publishes the EN family, and EN 485 governs aluminum and aluminum alloy sheet, strip, and plate. EN 485 splits into parts: Part 2 covers mechanical properties, Part 3 covers tolerances on dimensions and form, and Part 4 covers tolerances for specific product types. A European order typically cites the relevant parts rather than a single document.

EN standards use a different naming style. Alloy designations follow EN 573, which registers chemical composition with a four-digit number plus a letter suffix that marks a national variant. Temper designations follow EN 515. The underlying logic resembles the AA system, and the two systems share most of their four-digit numbers for wrought aluminum alloys. The differences sit in the details: permitted impurity ranges, tolerance tables, and the exact wording of property requirements.

EN documents also carry the weight of European law in many markets. A product marked CE under a harmonized standard must satisfy the EN text, and a certificate of conformity references the EN clause. Buyers outside Europe who source from European mills often receive EN certificates alongside AA designations, and the two sets of numbers usually agree. When they do not, the EN document governs the contract unless the purchase order says otherwise.

ISO Standards

The International Organization for Standardization publishes the ISO family, and ISO 6361 covers wrought aluminum and aluminum alloy sheet, strip, and plate. The standard splits into parts much like EN 485: Part 1 addresses technical delivery conditions, Part 2 covers mechanical properties, and Part 3 sets tolerances on dimensions and form. ISO 6361 draws heavily on the European tradition, and its property tables often mirror the EN values clause for clause.

ISO plays a different role from AA, ASTM, and EN. The organization acts as a bridge. Its technical committees harmonize national and regional practices into one document that member bodies can adopt. A mill in Asia, a fabricator in South America, and a buyer in Africa can all cite ISO 6361 and expect the same test methods and the same minimum values. That reach makes ISO documents common in global tenders and in supply chains that cross several regions.

The ISO system also publishes standards beyond plate. ISO 209 registers chemical composition for wrought aluminum alloys, and ISO 2107 covers temper designations. These documents give buyers a neutral reference when a contract spans countries with different national traditions. A purchase order that cites ISO 6361 alongside AA designations gives both the mill and the buyer a shared checkpoint. The ISO text governs the test method and the acceptance criteria, and the AA designation names the alloy and temper.

One practical point deserves attention. ISO 6361 lists properties for wrought aluminum alloys in a format close to EN 485, yet the two documents do not always carry identical numbers. A buyer who treats ISO and EN as interchangeable risks a mismatch on a marginal heat. The safe habit is to read the cited document, confirm the alloy and temper, and check the minimum values against the application. That habit applies to every standard in this article.

How the Big Four Compare

The four bodies overlap in purpose and differ in reach, legal weight, and vocabulary. A side-by-side view helps a buyer see where each document fits.

FeatureAAASTMENISO
Primary roleRegisters alloy and temper designationsWrites product specifications with test and acceptance rulesPublishes regional standards with legal force in EuropeHarmonizes practices for global adoption
Key plate documentDesignation and temper recordsASTM B209EN 485 (Parts 2, 3, 4)ISO 6361 (Parts 1, 2, 3)
Composition referenceTeal sheets and registration recordsClauses inside B209EN 573ISO 209
Temper referenceAA temper definitionsClauses inside B209EN 515ISO 2107
Legal weightVoluntary, adopted by referenceContractual when citedBacked by European regulationVoluntary, adopted by contract
Typical marketGlobal naming conventionNorth America and beyondEurope and European supply chainsGlobal tenders and cross-region trade

The table shows a clear division of labor. AA supplies the names. ASTM, EN, and ISO supply the enforceable text. A buyer who orders plate under ASTM B209 gets AA nomenclature plus ASTM acceptance rules. A buyer who orders under EN 485 gets EN 573 composition plus EN 515 temper codes. A buyer who orders under ISO 6361 gets a harmonized document that borrows from both traditions.

The differences matter most at the edges. Composition limits for cast aluminum alloys vary between systems, and trace element ranges can shift from one document to the next. Tolerance tables differ in how they treat flatness and thickness variation. Test methods differ in sampling frequency and retest rules. None of these gaps makes one system better than another. Each system reflects the industrial history and regulatory needs of its region.

A buyer who sources globally will meet all four systems on the same desk. The practical approach is to name the governing document on the purchase order, confirm the alloy and temper against that document, and request a certificate that cites the same clause. That discipline turns four vocabularies into one clear order.

How Standards Define Aluminum Alloys: Composition and Temper

How
Image Source: unsplash

A plate order rests on two pillars. The first pillar is chemistry: which elements enter the melt and in what amounts. The second pillar is temper: how producers heat, cool, and work the metal after casting. Standards treat these pillars in separate documents, and a buyer who reads only one of them holds half the picture. The sections below walk through each pillar and show how the documents fit together.

Alloy Chemistry Limits

Every specification begins with a table of limits. The table lists each element, a minimum for the elements that must be present, and a maximum for the elements that must stay below a threshold. Aluminum itself usually carries a minimum purity statement, and the remaining rows cover the alloying elements that give the metal its character.

The limits work as a window, not a recipe. A mill may hit any point inside the window and still comply. One heat of 6061 plate might carry 0.6 percent magnesium, and the next heat might carry 0.9 percent. Both heats meet the specification, and both carry the same designation. That flexibility lets mills work with available scrap and primary metal while keeping the product within a known range.

The window has real consequences. Magnesium raises strength in 5xxx and 6xxx families. Copper adds strength and hardness to 2xxx and 7xxx grades. Zinc drives the high strength of 7xxx plate. Silicon improves castability and fluidity. Each alloying element earns its place, and each one carries an upper limit because excess amounts harm ductility, corrosion resistance, or weldability.

Impurities get their own rows. Iron and silicon appear in almost every aluminum alloy, and the limits on these two elements separate premium grades from general-purpose grades. A tight iron limit costs more because the mill must select cleaner raw material. A loose limit lowers cost and accepts a wider range of input. The chemical composition standards in each system set these thresholds, and the thresholds differ from one document to the next.

The reference documents vary by region. ASTM B209 carries composition tables inside the specification itself. EN 573 registers composition for European products, and ISO 209 performs the same role for the international system. The Aluminum Association publishes its own registration records, often called teal sheets, and these records serve as the master list that other documents cite.

Cast and wrought products follow separate paths. Wrought aluminum alloys carry four-digit designations and tight limits on iron and silicon. Cast aluminum alloys use a three-digit number plus a decimal, and their limits allow more silicon and more iron because casting demands fluidity. Cast aluminum alloys also tolerate wider ranges of trace elements. A buyer who moves between product forms must switch reference tables, and the switch changes the numbers on the certificate.

Two families deserve special mention. Heat-treatable alloys gain strength from solution heat treatment and aging, and their chemistry must support that response. Copper, magnesium, zinc, and silicon drive precipitation hardening in these grades. Non-heat-treatable alloys gain strength from strain hardening alone, and their chemistry emphasizes magnesium, manganese, and chromium for solid-solution strengthening. A specification for one family rarely fits the other, and the composition limits reflect that split.

Temper Designations Explained

Chemistry sets the potential. Temper sets the delivered condition. A temper designation tells the buyer which mechanical and thermal steps the mill applied after casting, and those steps decide the strength, ductility, and residual stress in the finished plate.

The system uses a letter followed by digits. The letter marks the basic treatment family, and the digits record the specific sequence. The Aluminum Association publishes the definitions, and EN 515 and ISO 2107 carry parallel definitions for their regions. The logic stays the same across all three documents, and the codes usually match.

The letter families break down as follows:

  • F: as fabricated, with no special control over thermal treatment or strain hardening.
  • O: annealed to the softest condition, with maximum ductility.
  • H: strain hardened, with digits that record the amount of cold work and any supplemental treatment.
  • W: solution heat treated, a temporary condition that applies only between treatment and aging.
  • T: thermally treated, with digits that record the aging sequence and any stress relief.

The H and T families carry most of the commercial plate. The H family covers non-heat-treatable alloys such as 5052 and 5083. The T family covers heat-treatable alloys such as 6061, 7075, and 2024. A buyer who orders 5052-H32 gets a strain-hardened product. A buyer who orders 6061-T651 gets a thermally treated product. The two codes look similar, and they describe completely different processes.

The digits after the letter carry the detail. In the H family, the first digit records the strain-hardening level, and the second digit records any supplemental treatment such as partial annealing. In the T family, the digits record the aging sequence and the stress-relief method. A T6 temper means solution heat treatment plus artificial aging. A T651 temper adds a stretch after quenching to relieve residual stress. That stretch matters for machined plate because it limits distortion during cutting.

Reading a Temper Code

A temper code reads left to right, and each position carries a specific meaning. The table below decodes the most common plate tempers and shows what each position contributes.

CodeLetter familyFirst digitSecond digitThird digitPractical meaning
OAnnealed———Softest condition, maximum formability
H32Strain hardened3 = quarter hard2 = strain hardened and partially annealed—Moderate strength with improved ductility
H116Strain hardened1 = strain hardened only1 = standard level6 = special corrosion-resistant treatmentMarine-grade 5xxx plate with controlled microstructure
T4Thermally treated4 = solution heat treated and naturally aged——Good formability, moderate strength
T6Thermally treated6 = solution heat treated and artificially aged——High strength, common for structural plate
T651Thermally treated6 = solution heat treated and artificially aged5 = stress relieved by stretching1 = stretching appliedHigh strength with low residual stress for machining
T7451Thermally treated7 = solution heat treated and overaged4 = stress relieved by stretching51 = combined stretch and age sequenceHigh strength with improved corrosion resistance and dimensional stability

The first position always names the treatment family. The second position narrows the treatment within that family. The third position, when present, records a supplemental step such as stress relief or a corrosion-control practice. A buyer who reads only the letter misses the detail that decides whether the plate will stay flat after machining.

A temper code is not a quality grade. A higher number does not mean better metal. It means a different balance of strength, ductility, and residual stress, and the right balance depends on the application.

The code also ties back to the governing document. ASTM B209 lists the tempers it covers and the properties for each one. EN 485 Part 2 does the same for European products. ISO 6361 Part 2 follows the same pattern. A temper code that appears on a purchase order must appear in the cited specification, or the mill cannot certify the product. That check takes a minute and prevents a rejected shipment.

One more habit pays off. The temper designation on the certificate should match the temper designation on the purchase order, character for character. A T651 order that ships as T6 plate meets the alloy chemistry and misses the stress relief. The plate may pass a tensile test and still distort in the machine shop. The mismatch sits in the third digit, and only a careful reading catches it.

Composition vs. Temper: What Each Standard Controls

A single specification rarely owns both pillars of a plate order. Composition lives in one document, and temper lives in another. The split follows a simple logic. Chemistry belongs to the alloy, and temper belongs to the processing route. Different committees write the rules for each, and different clauses enforce them.

Composition documents answer one question: what enters the melt? The Aluminum Association registers chemical limits for each designation and publishes them as registration records. ASTM B209 repeats those limits inside its own text for the grades it covers. EN 573 performs the same service for European products, and ISO 209 serves the international system. Each document lists every alloying elements row by row, with a minimum for the elements that must be present and a maximum for the elements that must stay below a threshold. A mill that changes its scrap mix must still land inside that window.

Temper documents answer a different question: what happens after casting? The Aluminum Association publishes temper definitions that describe each treatment sequence. EN 515 carries the European version, and ISO 2107 covers the international system. These documents define what a temper designation means, but they do not set property values. A temper code such as T651 names a process. The property table that follows the code lives in the product specification, not in the temper document.

That division creates a practical trap. A buyer can confirm the chemistry of a heat against one document and confirm the temper against another, and still miss the clause that ties the two together. The product specification performs that tie. ASTM B209 lists the tempers it covers and the minimum properties for each alloy-temper combination. EN 485 Part 2 does the same for European products. ISO 6361 Part 2 follows the same pattern. A temper code that appears on a purchase order must appear in the cited product specification, or the mill cannot certify the plate.

The two pillars also interact. Chemistry sets the ceiling on what a temper can achieve. A 6061 heat with magnesium at the low end of the window will respond to aging, and it may land near the bottom of the strength range. A 7075 heat with zinc and copper near the upper limits will reach higher strength after the same treatment. The property table accounts for this spread by listing minimum values that every compliant heat must meet. The table does not promise a typical value, and it does not promise that two heats will match.

Heat-treatable alloys show the interaction most clearly. Their chemistry must support a precipitation response, and their temper sequence must deliver the aging step. A T6 temper on a 2xxx or 7xxx plate depends on both the alloying elements in the melt and the thermal cycle after rolling. Non-heat-treatable alloys follow a different path. Their chemistry emphasizes magnesium and manganese for solid-solution strengthening, and their temper sequence relies on strain hardening. A 5052-H32 plate gains strength from cold work, and its chemistry supports that route without a precipitation step.

Cast aluminum alloys add another layer. Their composition documents allow more silicon and more iron than wrought documents permit, because casting demands fluidity. Their temper designations follow the same letter families, and the property tables sit in separate casting specifications. A buyer who moves between wrought and cast products must switch both the composition table and the property table. The temper code alone does not signal the switch.

The reference documents also differ in how they handle variants. EN 573 adds a letter suffix to mark national variants of a composition. The Aluminum Association registers international designations without that suffix. ISO 209 sits between the two traditions and harmonizes the common grades. A buyer who compares a European certificate against a North American certificate may see the same four-digit number with different suffix letters. The underlying chemistry usually matches, and the suffix records a regional registration detail.

A simple rule keeps the two pillars straight. Name the composition document and the product specification on the purchase order. Confirm the alloy against the composition document. Confirm the temper and the minimum properties against the product specification. Request a certificate that cites both. That sequence closes the gap between chemistry and temper, and it turns a stack of standards into one verifiable order.

How Mechanical Properties Get Specified

Property tables turn a plate order into measurable acceptance criteria. Each product specification lists the values a mill must certify, and each value carries a test method behind it.

Tensile Strength and Yield Strength

Tensile strength records the peak stress a specimen carries before it breaks. Yield strength records the stress at which the metal deforms permanently. Engineers design to yield strength because a plate that bends stays bent. The property tables for aluminum alloys list both values for every alloy-temper combination, and the minimums differ across the standards. A 6061-T651 plate under ASTM B209 and the same plate under EN 485 usually share the same numbers, yet the clauses that enforce them sit in different documents. Buyers who compare certificates from two regions should read the cited specification, not the alloy name alone.

Elongation and Hardness

Elongation measures how far a specimen stretches before fracture, expressed as a percentage of gauge length. The value signals ductility, and forming operations depend on it. Hardness offers a faster check, and mills often use it as a screening test before the full tensile pull. Property tables for aluminum alloy plate list elongation minimums alongside tensile values. Hardness appears less often in plate specifications, and it usually serves as a reference rather than an acceptance criterion.

Minimum vs. Typical Values

Specifications publish minimums, not typicals. A minimum guarantees that every compliant heat meets the floor. A typical value describes what a mill usually produces, and it carries no legal weight. The distinction matters because alloying elements and processing routes shift actual properties within a range. A certificate that reports a typical value in place of a minimum invites a dispute. Buyers should confirm that the certificate cites the specification clause and reports the guaranteed minimum for each property.

Test Methods and Certification

A property table means nothing without a test method behind it. Each product specification names the test standard that governs the pull, the sampling plan, and the retest rules. ASTM B209 points to ASTM E8 for tension testing. EN 485 Part 2 references EN ISO 6892-1. ISO 6361 Part 2 cites the same ISO method. The test methods for aluminum alloys differ in specimen geometry and gripping details, yet the underlying physics stays the same. A mill that tests aluminum alloy plate to one method and certifies to another creates a mismatch that a careful buyer will catch.

DocumentTension test methodSampling basis
ASTM B209ASTM E8Lot-based, per heat treat lot
EN 485 Part 2EN ISO 6892-1Lot-based, per EN 485 Part 1
ISO 6361 Part 2ISO 6892-1Lot-based, per ISO 6361 Part 1

Certification closes the loop. A mill certificate reports the chemistry, the temper, and the tested properties for each lot. The certificate must cite the governing specification and the test method. Buyers of aluminum alloys should verify that the certificate names the same standards as the purchase order. The alloying elements on the certificate should match the composition table, and the temper code should match character for character.

A certificate that cites a different specification than the purchase order is not a minor clerical error. It is a compliance gap that can void the acceptance.

Test laboratories that serve aluminum alloy supply chains often hold accreditation to ISO/IEC 17025. That accreditation gives the test report independent weight. Producers of aluminum alloys in every region rely on accredited labs to keep certificates credible across borders. The same discipline applies to aluminum alloy plate from any source: confirm the method, confirm the lab, and confirm the clause.

Choosing the Right Standard for Your Aluminum Alloy Plate

Match the Standard to the Application

Application fit drives the first decision. A structural weldment needs a specification that covers weldability and toughness. A precision machined component needs a temper with low residual stress, such as T651. A marine hull calls for a grade with proven corrosion resistance under the cited document. Buyers should list the service conditions first, then select the specification that tests for those conditions. This sequence keeps the aluminum alloy plate order tied to real performance rather than habit.

Check Regulatory and Code Requirements

Many projects carry legal obligations beyond the purchase order. Pressure vessels, bridges, and aerospace parts often fall under codes that name a specific specification. A European project may require CE marking under a harmonized EN document. A North American structural job may cite ASTM B209 by law. Designers of aluminum alloys must confirm the governing code before release. The same aluminum alloy can pass one code and fail another, so the cited document governs acceptance.

Weigh Availability and Cost

Commercial reality shapes the final choice. Common grades of aluminum alloys sit in stock at many mills, and lead times stay short. Rare tempers of aluminum alloy demand special rolling runs and carry higher prices. Buyers of aluminum alloys should compare mill schedules before locking a specification. A slight change in alloying elements or temper can open a wider supply pool. Producers of aluminum alloys price each document differently, and freight adds another variable. Early quotes on aluminum alloy plate prevent late surprises.

Confirm Equivalencies Across Systems

Cross-reference charts promise a simple answer. A buyer looks up 6061-T651, finds the EN and ISO equivalents, and writes the order. That shortcut carries risk. Equivalent designations name the same family of aluminum alloys, yet the documents behind them do not always carry identical numbers.

The gaps appear in three places. Composition tables for aluminum alloys permit slightly different impurity ranges from one system to the next. Temper definitions for aluminum alloy plate match in most cases, and a few codes carry regional variants. Property minimums for aluminum alloys shift by small margins, especially at the edges of a grade. A buyer who treats a cross-reference chart as proof of identity may accept a certificate that misses the cited clause.

CheckWhat to compareWhy it matters
ChemistryAlloying elements and impurity limitsTrace ranges differ between documents
TemperCode and treatment sequenceRegional variants change the process
PropertiesMinimum tensile, yield, elongationMarginal heats can fall short

A practical routine closes the gap. Pull the composition table from each cited document and compare the alloying elements row by row. Confirm the temper code against the temper standard of the receiving region. Compare the property minimums for the specific product form. Producers of aluminum alloys publish these tables, and a careful review takes minutes.

Two documents can describe the same aluminum alloy and still set different floors. The purchase order must name the governing document, not the equivalent.

Buyers of aluminum alloys should record the equivalence check on the order file. That record protects both sides when a certificate arrives from another region. The same discipline applies to every aluminum alloy in the catalog. Equivalence is a starting point for inquiry, never a substitute for reading the cited standards.


Aluminum alloy standards are the shared rules for composition, temper, and properties that make aluminum alloy plate products comparable and reliable. AA supplies the designations, ASTM, EN, and ISO supply the enforceable text, and the four fit together as names plus rules. Buyers must check all three pillars, because composition, temper, and mechanical properties sit in different documents. Equivalent standards do not guarantee identical numbers, since the same aluminum alloy can carry different minimums. Producers of aluminum alloys and users of aluminum alloys both benefit from early questions. Application fit, regulatory compliance, and cost decide the right standard, and asking up front saves time and money. Careful buyers of aluminum alloys read the cited document, confirm the alloying elements, and protect every order. That habit keeps aluminum alloys predictable across regions, and it keeps aluminum alloys competitive on cost.

FAQ

Which standard should a buyer cite on a purchase order for aluminum alloy plate?

The buyer cites the document that governs acceptance. North American orders typically name ASTM B209. European orders name EN 485. Global tenders often cite ISO 6361. The purchase order should also carry the AA designation for the alloy and temper. One governing document plus one designation keeps the order clear.

Do equivalent designations guarantee identical properties across standards?

No. Equivalent designations name the same family of aluminum alloys, yet the documents behind them set different floors. Composition tables permit slightly different impurity ranges. Property minimums shift by small margins. Buyers should compare the alloying elements and the minimum values row by row before they accept a cross-reference chart as proof.

What should a mill certificate include for aluminum alloy plate?

A complete certificate reports the chemistry, the temper code, and the tested mechanical properties for each lot. It cites the governing specification and the test method. The alloying elements on the certificate should match the composition table. The temper code should match the purchase order character for character.

How does temper affect the choice of aluminum alloys for machining?

Machining demands low residual stress. A T651 temper adds a stretch after quenching, and that step limits distortion during cutting. Standard T6 plate carries higher residual stress. Buyers of aluminum alloys who machine thin sections should specify the stress-relieved temper and confirm it on the certificate.

Why do producers of aluminum alloys publish separate documents for composition and temper?

Chemistry belongs to the alloy, and temper belongs to the processing route. Separate committees write the rules for each pillar. The product specification ties the two together by listing properties for every alloy-temper combination. Buyers of aluminum alloys should check both documents plus the product specification before release.

Previous page: