Aluminum-Magnesium-Scandium Alloy Welding Wire – A High-Strength, Corrosion-Resistant, Highly Weldable Lightweight Material

Aluminum-Magnesium-Scandium Alloy Welding Wire – A High-Strength, Corrosion-Resistant, Highly Weldable Lightweight Material


Product Overview

Zhonglu Light Alloy Research utilizes high-purity metals as raw materials and employs a vacuum melting-casting-extrusion-drawing process to produce aluminum-magnesium-scandium alloy wires. By leveraging vacuum melting technology, the process effectively addresses common challenges in high-magnesium aluminum alloy casting—such as hydrogen absorption, oxide slag formation, compositional segregation, and severe shrinkage porosity—enabling the creation of highly purified, high-quality extruded billets made from aluminum-magnesium-scandium alloys. This ensures a robust foundation for subsequently manufacturing premium-quality aluminum-magnesium-scandium alloy welding wires.

Keywords:

Aluminum-Magnesium-Scandium Alloy Welding Wire – A High-Strength,

magnesium welding wire

Product Details


Product Model: almgcu51

Product Details:

Zhonglu Light Alloy Research & Development uses high-purity metals as raw materials and employs a vacuum melting-casting-extrusion-drawing process to produce aluminum-magnesium-scandium alloy wires. By utilizing vacuum melting technology, the process effectively addresses common challenges in high-magnesium aluminum alloy casting—such as hydrogen absorption, oxide slag formation, compositional segregation, and severe shrinkage porosity—enabling the production of highly purified, high-quality extruded billets made from the aluminum-magnesium-scandium alloy. This ensures a robust foundation for subsequently manufacturing premium-quality aluminum-magnesium-scandium alloy welding wires.


IMG_256

Compared to joints made with conventional Al-Mg welding wire under the same conditions, the AlMgSc welding wire joints exhibit a tensile strength improvement of 40–100 MPa, along with enhanced ductility and toughness. Additionally, both elongation at break and impact toughness are boosted by 20% to 50%, while the high-frequency fatigue limit increases by 15–25 MPa (for 10^7 cycles), representing a relative improvement of 20% to 40%. 
To meet the demand for high-strength, corrosion-resistant, and highly weldable lightweight materials in industries such as aerospace and aviation, Chinalco Light Alloy Research has developed a series of aluminum-magnesium-scandium alloy welding wires, including grades like 5A70, 5B70, 5A71, 5B71, and 01571. These products are ideal for welding aluminum-magnesium alloys such as 5A05 and 5A06, as well as for use in 3D printing additive manufacturing processes. Additionally, based on customer needs, these alloys can be customized to meet specific compositional requirements.


IMG_257

China Aluminum Light Research's aluminum-magnesium-scandium welding wires are delivered in bulk, packaged in standard 270mm and 300mm diameter spools under vacuum. Available in diameters of 1.0mm, 1.2mm, 1.6mm, 2.0mm, and other custom specifications, these wires feature dimensional tolerances ranging from -0.01 to +0.01 mm, with each spool weighing between 5 and 7 kilograms. By meticulously optimizing production processes such as melting, casting, extrusion, and heat treatment, the company ensures strict control over the gas content in the welding wires. As a result, the hydrogen levels in the aluminum-magnesium-scandium alloy welding wires produced by China Aluminum Light Research remain tightly controlled—often staying below 0.12 mL/100g Al—effectively guaranteeing superior wire quality and performance.

Application Areas


Aerospace

Aerospace

3C Consumer Electronics

3C Consumer Electronics

Smart Robots

Smart Robots

Low-Altitude Economy

Low-Altitude Economy

New Energy Vehicles

New Energy Vehicles

Leave A Message